Did you know that a VCR can be hooked up with smart TVs? Well, it is true that you can hook up your VCR to the majority of modern televisions, though you might need to have one to two cables. However, it isn’t a hassle as you will get to enjoy your VCRs.
If you wonder how to hook up a VCR to a smart TV, know that you have just visited the right place. Read on to learn more about the different ways you can do when connecting your VCR.
3 Ways On How To Hook Up A VCR To A Smart TV
1. Use An HDMI Converter
Begin this method by preparing a component or composite RCA cable. Note that this will depend on what your VCRs use. Also, you should get an extra HDMI cable if you don’t have one. Depending on what the VCR uses, you can get a component to HDMI or composite to HDMI adapter.
If you have all the needed equipment, connect the plugs (colored) on one end of your cable to the colored ports matching your VCR. If you are using component video, one of the red-colored plugs will be adjoining to the white plug, basically with the wires that separate at higher points compared to other plugs. The read plug must be directly connected next to the white port, and the other red-colored plug must be next to the blue and green ports.
On the other hand, attach the colored plugs on the other side of your cable into their corresponding parts on your adapter. However, if you’re making use of a component connection, note which red plug is more adjacent to the white plug.
Then connect your HDMI cable to the HDMI port found on the adapter. After which, connect the HDMI cable’s other end in order to free the HDMI port on your smart TV. Plug the power cable of the adapter into the power port and plug the other end into the outlet. Lastly, switch your smart TV to the HDMI input where you plug the adapter.
2. Use White Audio Out
There are VCRs that have only single audio, and that is white in color. With these VCRs, you will not be able to see red as well as white output. Connecting your VCR with the mono channel to your smart TV is very easy and straightforward. All you need to do is connect from the audio socket of your VCR.
3. Hook Up Through The Green Socket
The list of ways on how to connect a VCR to a TV will not be completed without mentioning the green socket.
Some TVs do not make provision for red, yellow, and white sockets. Rather, such TVs have a green socket. If you check the back of the majority of smart TVs, you will find a green socket that is labeled with “VIDEO IN.”
However, it is best to hook up your VCR yellow lead to the green socket on your TV rear. Most smart TVs have sockets in which the red and white audio cables will go. Look for them at the back of your TV and then plug the cables, and this will handle the audio output.
You can also find another red socket at the back of your TV close to the other end, and it’s labeled with “PR.” When you plug the red lead from the VCR into the said socket, the audio won’t come up.
Is It Possible To Connect Old DVD Players To New TVs?
This is possible as long as both the TV and the DVD player come with video and audio connections or HDMI connectors. There are old DVD players that come with these two features. Having said that, you will not have a hard time connecting the plyer to your new TV.
What Channels Should Your TV Be On For VCR Player?
To change your channel to either 3 or 4, you can press the Channel – and Channel + button on your TV. You can also use the remote controls that come with your television. Know that the channel that is used may differ from one TV to another. But the moment that your VCR displays a blue screen, knows that you are good to go.
Knowing how to hook up a VCR to a smart TV is important, especially if you have collections of VCRs. Nevertheless, we hope that you find this post helpful, and don’t forget to share it with others who want to enjoy their VCRs again.